← Home All Mobile Robotics

Load audio into the voice box SPK-5-24 · all models

No drive selected ไทย

Before you start

  1. Switch off the 24 V supply of the voice box first — the manual says not to connect USB while the box is playing
  2. Connect the Micro USB port on the back of the box to the computer and wait until it shows up as a new drive (about 128 MB)
  3. Press Select the voice box drive and selectthe drive itself (the top level that contains the AW001 folders), then allow editing files
  4. Put MP3 or WAV files into the folders you want (drag and drop, or choose files), then press Write to box
  5. Use Safely remove the device (Eject) before unplugging the cable, then reconnect the 24 V supply
How-to video · 1:40 · Thai captions
The box plays the files in folders AW001–AW255 in a loop until another folder or stop is commanded · one file per folder is simplest · this page renames files to numbers (01.mp3) to avoid problems with non-English or long names
The AMR controller board (firmware ≥ 1.11.0) plays AW001 while the wheels move · AW002 when the bumper is hit · AW003 when E-stop is pressed — change the numbers with the board settings spk_* of the board

Folders in the box

No drive selected
Add files now — nothing is written until you press "Write to box"